NEWS

OOC: Urban Brawl

  • 2168 Replies
  • 353239 Views

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1650 on: <05-31-13/1746:30> »
Zach, awesome idea to break out the torch inside the ductwork

Miniwelder. In fact it uses "small electric arc to melt metals" DV 15 if used on barriers, power supply 30 min, So no open fire :p Fixed that in IC. So what. Should I go back or you try to levitate down by yourself?
« Last Edit: <05-31-13/1749:31> by Sichr »

Thermo

  • *
  • Omae
  • ***
  • Posts: 883
« Reply #1651 on: <05-31-13/1943:14> »
Laugh, I thought you were using the miniwelder to cut out the ductwork so Storm could get through, my bad.. still a good idea though  :)

Up to you if you want to stick together or not. Still gotta get out of the building at some point. Hallway might be a decent choice versus jumping through the flaming window, though it would be nice to know what's out there. If you get into the adjoining room and there's a door to the hall you could always pop it open a crack and toss out an EMP grenade to clear the hallway...

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1652 on: <06-01-13/0519:08> »
Laugh, I thought you were using the miniwelder to cut out the ductwork so Storm could get through...

Hey, I would do that if thats possible, well IMO those things are built in walls, and cutting the metal would only bring the concrete behind it :(
Are you sure that you wont be able to get into the shaft?

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1653 on: <06-01-13/0601:51> »
@Inca: IMO Zach realizes something is wron soon enought and I would think abnout returning for Storm. From Zachs POV, would it be possible to help her into the vent and push her throught? Or does Zach consider this waste of efforts and would focus on anothe tactics?

Thermo

  • *
  • Omae
  • ***
  • Posts: 883
« Reply #1654 on: <06-01-13/0932:38> »
Laugh, I thought you were using the miniwelder to cut out the ductwork so Storm could get through...

Hey, I would do that if thats possible, well IMO those things are built in walls, and cutting the metal would only bring the concrete behind it :(
Are you sure that you wont be able to get into the shaft?

I doubt it.. to get 4 hits on a dice pool of 4 is possible but it's going to take some serious luck. Depends on if Inca would allow it as an extended test or something. I can put Edge towards it but again it's still pretty tough to get 4 hits.

Depending on the layout of the building it may help to have you outside the room.. inside the room we're sitting ducks, if you can get to another window or the hallway you may be able to take out enough drones that Storm can get free. Hopefully there's enough time to get free before the fire spreads.

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1655 on: <06-01-13/1104:21> »
The fire may be problem, I hope we eill be able to get out soon.

Thermo

  • *
  • Omae
  • ***
  • Posts: 883
« Reply #1656 on: <06-01-13/1242:31> »
I may have a way to get the fire under control. Lets focus on getting into a more strategic position. Go ahead and see where the HVAC duct takes and and we'll form a plan from there.

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1657 on: <06-01-13/1256:25> »
Working on it...

inca1980

  • *
  • Ace Runner
  • ****
  • Posts: 2294
« Reply #1658 on: <06-01-13/1508:57> »
@Zach:

Well imagine you're totally prone in a tight little shaft.  It's impossible to turn around and the only way back is shuffling and pushing yourself backwards. 

@Storm:

Yes the drone is disabled by the blast you can tell.  At the very moment no more drones are in the room but that could change.

Thermo

  • *
  • Omae
  • ***
  • Posts: 883
« Reply #1659 on: <06-01-13/1639:42> »
I'm going to let the dwarf earth spirit finish off the drone using his hammer.. even though it's spinning around it might get off a lucky shot or communicate sensor information to the other drones

Thermo

  • *
  • Omae
  • ***
  • Posts: 883
« Reply #1660 on: <06-01-13/2127:31> »
@Inca: I'm going to try and get through the duct. Are there are mitigating factors I can use to my advantage? If Zach helps pull me through what does that do to the threshold? I'm going to use Edge on the attempt, but with Str 2 and Agi 2 I'll need all the help I can get. I can't assume Storm is really stubborn and use Willpower can I?  :)

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1661 on: <06-01-13/2132:12> »
Stay low, I`ll check the window and call you


inca1980

  • *
  • Ace Runner
  • ****
  • Posts: 2294
« Reply #1663 on: <06-02-13/0204:58> »
Make sure to IC the communications you guys are having.  You can plan stuff out OOC but make sure to mirror it in IC so that it makes sense.

Sichr

  • *
  • Prime Runner
  • *****
  • Posts: 7202
  • TOTÁLNÍ FAŠÍRKA ZMRDI !!!
« Reply #1664 on: <06-02-13/0419:06> »
understood. Srry.